Line Reference: Set up the unique format tag suffix list. Use the AutoCAD Electrical toolset Project-wide Update/Retag tool to retag the whole drawing set. Note: If you finish a drawing and move to the next, but return to the first drawing to add another component and sequential tag, a gap appears in the numbering sequence for that drawing. As you insert components on any drawing of the project set, AutoCAD Electrical toolset starts with the value you set and works its way up until it finds the next unused sequential number tag for the target component family. Sequential tags can continue uninterrupted from one drawing to the next if you assign the same beginning sequential number to every drawing in your project. Sequential: nter the beginning sequential number for the drawing. Note: This setting is saved in the MISC_FLAGS attribute on the WD_M block of the drawing. If found, the I/O address value is substituted for the “%N” part of the default component tag. Search for PLC I/O address on insert: Searches for a connected PLC I/O module’s I/O point. Note: The %N parameter is mandatory in any component tag format you define. Note: AutoCAD Electrical toolset provides a predefined format for you to use or you can enter your own format using replaceable parameters. If your format includes the sheet number %S parameter or the drawing number %D parameter, enter the values in the edit boxes in the Drawing Properties Drawing Settings dialog box. Optionally, a component tag might contain a sheet number or some user-specified separators. The tag consists of a minimum of two pieces of information: a family code and an alphanumeric reference number (for example, “CR” and “100” to yield a tag like CR100 or 100CR). Tag Format: Specifies the way new component tags are created. You can insert the attributes individually as needed, or you can insert all the attributes from the template at one time.Īttribute templates follow the naming convention, AT_ in the _FAMILY_DESCRIPTION table of the catalog database, default_cat.mdb. For example rating or switching position attributes. Optional attributes are attributes that may not be necessary on this symbol type but are supported. The required attributes are expected on the specific symbol type you are building. The attribute template can contain attributes defined as required and others as optional. When you select your symbol type, the associated attribute template is used to create a list of attributes. The supplied attribute templates are in the symbol library folders and all attribute template drawing names begin with “AT_”. There are different attribute templates for different types of symbols and for different family codes. Attribute template drawings are AutoCAD drawings with AutoCAD Electrical toolset attributes. Symbol builder uses attribute templates to facilitate adding these attributes to your symbol. Must have a P_TAG1 and NP attribute or xdata.Īttribute Template: AutoCAD Electrical toolset expects certain attributes for each symbol type, schematic parent, schematic child, and so on. Must have a P_TAGSTRIP and FPT attribute or xdata. Must have a P_TAG1 and FP attribute or xdata. Panel Footprint: Panel symbol that is not used as a terminal or nameplate. Schematic Terminal: Schematic terminal that follows the wire number rather than having a terminal number of its own. Schematic Terminal: Schematic terminal with terminal number. Schematic Child: Schematic secondary symbol that is related to a parent component. Must have a TAG1, TAG, or split TAG1 attribute. Schematic Parent: Schematic symbol is used as a stand-alone symbol or a parent component with related secondary contacts. You can also select it from the Type it or Browse options in the bottom left-hand corner of the icon menu. You can add your new symbol to the icon menu. New symbols you create are inserted with the AutoCAD Electrical toolset Insert Component or Insert Panel Component commands. Selecting the objects allows the tool to track what standard attributes and wire connection points you already inserted. Each time you re-enter the Symbol Builder tool, select objects from within the Select Symbol/Objects dialog box. The AutoCAD Wblock command writes it to disk. You can also exit the command and use regular AutoCAD commands to edit or finish the symbol you are creating. You can exit the Symbol Builder command and re-enter it at any time. They break wires upon insertion, and appear in the bill of material and various component and wire connection reports. Symbols created or converted using Symbol Builder are fully compatible with AutoCAD Electrical toolset. You can convert symbols or create custom components on the fly.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |